Introduction

The DYMO LabelWriter Wireless label printer has been certified by Covetrus for its cloud software. This article explains the requirements and contains documentation from DYMO to assist in configuring the wireless setup.

Requirements

In order to be able to print to the DYMO LabelWriter Wireless, you will need the following prerequisites:

• Windows or Mac computer
• Wireless/WiFi network connection
• DYMO Label software

  Windows: https://evetpractice.blob.core.windows.net/installs/DLS8Setup8.7.4.exe

  Mac: https://evetpractice.blob.core.windows.net/installs/DLS8Setup.8.7.5.dmg 

  Mac OS 10.7.5: must install an earlier version of Dymo the Dymo Label Writer: http://download.dymo.com/dymo/Software/Mac/DLS8Setup.8.5.1.dmg

WiFi Setup for DYMO LabelWriter Wireless

Please see the attached PDF document for documentation on how to configure your LabelWriter to your wireless network. As with other printer configurations, this is a client responsibility. If you encounter issues getting your LabelWriter Wireless connected to your computer, it is recommended to contact DYMO for assistance.

Additional Information

Because you are still required to install DYMO Label Software onto a Windows or Mac, computer, there is no real benefit to use the DYMO LabelWriter Wireless over the other USB connected LabelWriters (400, 450, 450 Turbo) other than not having to have it connected directly to a computer. Making it available on the network is done via WiFi connection instead of printer sharing. 

DYMO LabelWriter Wireless UserGuide

Related Articles

• How do I set up and install a DYMO LabelWriter printer?
• How do I configure an installed DYMO LabelWriter printer?
• DYMO Labelwriter setup troubleshooting article